Frequently Asked Questions

How do I test a negative ground Ignitor module?
Only Ignitor modules can be tested with the following steps. Ignitor II and Ignitor III modules should not be tested in the same manner. 

  • Negative ground modules have one red and one black wire.  
  • Open the attachment below and follow the directions on it.
  • For additional support after performing these test contact the technical support line at 909-599-5955 Ext. 1

Attachments: Negative Ground Module Test.pdf (53.4 kb) 


 Last updated Fri, Nov 16 2018 11:04am

Please Wait!

Please wait... it will take a second!