Frequently Asked Questions
What should the module air gap be?
Most of our Ignitor kits are not adjustable and are factory set to the appropriate air gap. Some kits do require setting the gap between the module and the magnet sleeve. In these cases we supple a clear plastic feeler gauge that measures 0.030". This is inserted between the module face and the magnet ring before tightening down the module. As a general rule, the gap can be set to a minimum of 0.010" and a maximum of 0.060". Any module gap between these two settings will provide the same results. The use of traditional steel feeling gauges will not create a problem with the module
Last updated Wed, Aug 31 2016 3:01pm